How To Make A Plastic Boxes

How To Make A Plastic Boxes

There are several ways to make a plastic box, depending on the type ofThere are several ways to make a plastic box, depending on the type of plastic and the tools you have available. Here is a general guide on how to make a simple plastic box using injection molding:


* Plastic pellets (acrylic, polystyrene, etc.)
* Injection molding machine
* Heat source
* Molding tools (cavities and cores)
* Cooling system


1. Design your plastic box using a CAD software or by sketching it on paper. Make sure to include draft angles and vent holes if necessary.

2. Create a mold for your plastic box using aluminum or steel. The mold should be made in two halves that can be separated after the injection process.

3. Preheat your injection molding machine to the recommended temperature for your plastic pellets.

4. Melt the plastic pellets in the heating chamber of the injection molding machine.

5. Inject the melted plastic into the mold cavity through the sprue (a small channel that connects the heating chamber to the mold).

6. Allow the plastic to cool and solidify inside the mold. This may take a few seconds to a few minutes depending on the size and complexity of your plastic box.

7. Open the mold and remove the plastic box. Trim any excess material from the edges using a sharp knife or scissors.

8. Inspect the plastic box for any defects or imperfections. If necessary, recycle the defective parts and repeat the injection molding process.

Note: Injection molding is a complex process that requires specialized equipment and knowledge. It is recommended to practice on small projects before attempting to make larger or more intricate plastic boxes.

Product Catagories

Request A Quote

Can’t find the specific information you’re looking for? Have a question ? Contact Us